How to relocate a upright piano

Pianos routinely make movers yearly list of products that are most regularly damaged. Grand pianos are particularly bothersome. Practicing the following treatments for taking apart, padding and loading grand pianos will avoid damage, lower claims cost, and improve customer satisfaction.

1) A minimum of three people are needed to manage a child grand piano. If the baby grand piano requires to increase or down stairs or if a full or performance grand piano requires to be transferred, a minimum of four people are required.

2) Always finish a accurate and extensive stock. It may be essential or more suitable to utilize a visual inventory to effectively describe and reveal pre-existing damage.

3) As different parts are taken apart, please place all hardware in an effectively labeled parts bag and after that position the parts bag in a "Parts Box".

4) Get rid of the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furnishings pad.

5) Disconnect the lid by eliminating the hinge pins. Have a single person wiggle the lid, holding it opposite the hinge, while a second individual works the pin loose. Please be mindful not to damage the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a small fabric to assist prevent damage to the wood if required. Wrap the lid in a clean furnishings pad.

6) Get rid of the prop that holds the cover open and wrap it in a clean furniture pad. The prop has a hinge pin and is in two pieces.

7) Eliminate the pedal assembly and wrap it in a tidy furnishings pad. The braces at the back of the assembly rest in slots at each end. When getting rid of the screws, please take care not to drop the braces. In addition, please be especially careful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the appropriate number on each rod. Keep in mind: If masking tape is not available, please use correctly labeled parts bags for this purpose. When reassembling at location, please make certain to put the rods in the right order so that the pedals will work correctly.

8) Pad the piano by positioning a clean rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to avoid it from tumbling open while you deal with the piano. Cover the top of the piano with 2 tidy furnishings pads, nicely folded around the keyboard. Use elastic band to secure the pads. Keep in mind: click Please guarantee that the surface area of the piano is dust-free before padding it. Padding an extremely refined surface area that is dusty might trigger fine scratches, particularly on a black lacquer finish.

9) Position a piano board and attach the straps so that it is prepared to get the piano. The raised brace on the piano board should be at the keyboard end of the piano.

10) Get rid of the left front leg by placing one person underneath the piano at the left end of the keyboard. Be sure to website have 2 individuals lifting the corner of the piano while the third individual gets rid of the leg. Note: Please be sure to note which legs were gotten rid of from which positions considering that some pianos have legs that are not interchangeable.

11) Place the piano on the piano board by lowering the "leg-less" end onto the board. Please be sure to raise the entire piano a little while completing this maneuver to avoid unnecessary pressure on the staying, connected legs as the piano suggestions. Raise the piano to an upright position on the board. Note: Please make sure that the soundboard is safe prior to lifting. Make certain that the piano is focused snugly against the brace at the end of the piano board. Keep in mind: Never leave the piano ignored. Constantly have at least someone holding the piano steady at all times.

12) Eliminate the 2 staying legs and wrap them in clean furniture pads. These legs are kept in location by a "crucial and slot" plan. To eliminate the leg, slide it inward towards the center of the piano till it comes out of the slot.

13) Protect the piano to the piano board by bringing completions of the straps together and fastening them. Place folded burlap pads over the furniture pads but under the straps to provide additional protection to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of news the two straps together.

14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, utilize the piano board as a skid. After sufficiently padding the stairs for protection versus house damage, position the keyboard end of the piano towards the bottom of the stairs. Attach a hump strap to the leading end of the piano board to avoid the piano from slipping.

16) To fill the piano, leave it on the piano board and location it in a tier as the first base item with the keyboard dealing with the wall of the preceding tier. The finest place to load the padded cover is in between the piano and the preceding tier or between the piano and the wall.

Grand pianos represent a considerable challenge, they can be moved without damage by utilizing common sense and practicing the treatments listed above.

Leave a Reply

Your email address will not be published. Required fields are marked *